RANGE ROVER SPORT STEREO REMOVAL GUIDE

LAND ROVER RANGE ROVER SPORT
REMOVAL INSTRUCTIONS:
FIRST REMOVE THE LARGE TRIM PANEL SURROUNDING THE HEAD UNIT/STEREO, ITS SIMPLY CLIPPED IN PLACE WITH METAL CLIPS, NOW YOU CAN REMOVE THE EIGHT T20 TORX SCREWS (4 SECURE THE HEAD UNIT, 2 SECURE THE CENTER CONSOLE), NOW UN PLUG THE SWITCH PANEL ABOVE THE HEAD UNIT & REMOVE, NEXT REMOVE THE GEAR KNOB BY PULLING UPWARDS, NOW REMOVE TRIM PANEL SURROUNDING THE GEAR LEVER (ITS HELD QUITE TIGHTLY IN PLACE WITH METAL CLIPS) ALSO UNPLUG ALL WIRING CONNECTIONS, YOU CAN NOW REMOVE THE LARGE CENTER CONSOLE TRIM PANEL HOUSING THE DRINKS POCKETS (START ALONG THE BACK EDGE) AGAIN ITS HELD IN PLACE WITH METAL CLIPS, ONCE REMOVED THE STEREO CAN NOW BE REMOVED FROM THE DASH.
EXTRA INFORMATION:
SEE VIDEO LINKS BELOW FOR NAVIGATION HEAD UNIT REMOVAL
VIDEO FITTING LINKS:
Picture
DIFFICULTY RATING:
TOOLS REQUIRED:
Picture
TRIM REMOVAL TOOL
Picture
T20 TORX SCREWDRIVER
ACCESS REQUIRED:
Picture
WIRING HARNESS
Picture
AERIAL ADAPTER
 Difficulty Key:
* Straightforward install requiring little or no trim removal & minimal fitting skill/experience.
** More complex installation including bolt-in Head Unit &/or trim removal. 
*** Complex installation including Hard Wiring, bolt-in Head Unit & extensive trim removal.
 Where to find the Correct Fascia & Harness Adapters:

              - ArmourAutomotive.com (Autoleads)
              - Connects2.co.uk